This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Enamorte. You need a license to use this tube. I received this tube as I am a member of the Diamond Club and it was December’s tube of the month.  Enamorte tubes can be found HERE

I am using the PTU Kit IB Enamorte December 2018 AOTM by Foxys Designz. This kit is sold at CDO






Open new image 600 x 600

Edit, copy Frame 1

Edit, paste, paste as new layer

Image, resize 60%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, Resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Element 17

Edit, paste, paste as new layer

Image, resize 50%

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Layers, Duplicate

Image, Mirror

Move to the middle of the other flowers

Move down and behind the two flowers on each side

Edit, copy Element 8

Edit, paste, paste as new layer

Image, resize 70%

Layers, Arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 9

Edit, paste, paste as new layer

Image, resize 70%

Move to the right side of the frame and move around til you have it where you wish

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Element 5

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and move til it is above the vines and around so you can see the flower. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Element 20

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place behind and down some behind the flower

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Element 12

Edit, paste, paste as new layer

Image, resize 50%

Move to the left side of the frame behind the flowers and move up make sure it is above the flower vine

Image, rotate, free rotate, left 20

Effects, 3D Effects, Drop Shadow, Same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Pinuptoons. You need a license to use this tube.  You can purchase the tube at CDO

I am using the PTU kit IB Pinuptoons 208-3 by Ladyhawwk Designs. You can find this kit at CDO

AWD-CurlyMistMask-18. This mask was a gift for an event in the CDO Diamond Group. But you can find beautiful work HERE by the maker of the mask






Open new image 600 x 600

Edit, copy Element 25

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 5

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, copy Element 11

Edit, paste, paste as new layer

Image, resize 70%

Move to the bottom of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 10

Edit, paste, paste as new layer

Move to the right side of the frame

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Ele 6

Edit, paste, paste as new layer

Image, resize 75%

Move to the left side of the frame in front of the fence

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Image, Mirror

Move and place some in front of the tree. Move til you have it placed where you wish

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 2

Edit, paste, paste as new layer

Image, resize 50%

Move to the left placing behind the tube and in front of the tree

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 13

Edit, paste, paste as new layer

Image, resize 40%

Move to the right side of the tube but keep it behind her arms. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 20

Edit, paste, paste as new layer

Image, resize 70%

 Move to the right behind the tube and in front of the fence

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 5

Edit, paste, paste as new layer

Image, resize 50%

Move to the left placing behind the gifts and to the left in front of the tree

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 3

Edit, paste, paste as new layer

Image, resize 40%

Image, Mirror

Move to the left placing in front of the gifts

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 26

Edit, paste, paste as new layer

Image, resize 30%

Image, Mirror

Move in front of the tubes hands

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Paper 5

Edit, paste, paste as new layer

Layers, arrange, Send to bottom

Layers, Load/save mask, load mask from disk, settings:

AWD-CurlyMistMask-18
Source Luminance
Fit To Canvas
Invert Transparency NOT Checked
Hide All Mask

Layers, merge, merge group

Layers, Duplicate

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Pinuptoons. You need a license to use this tube.The tube can be purchased at CDO

I am using the PTU Kit IB Pinuptoons December 2018bt by Foxys Designz. This kit is sold at CDO






Open new image 600 x 600

Edit, copy Frame 3

Edit, paste, paste as new layer

Image, resize 50%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, Resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, Copy Element 15

Edit, paste, paste as new layer

Image, resize 65%

Move to the left side of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, same Settings

Move to place the tube in front of the tree some

Select Raster 2

Edit, copy Element 9

Edit, paste, paste as new layer

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Edit, copy Element 20

Edit, paste, paste as new layer

Image, resize 70%

Move to the right of the tree and move over. Make sure this is behind the tree and above the element you just added. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 19

Edit, paste, paste as new layer

Image, resize 50%

Move to place behind the tube and in front of the tree. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 4

Edit, paste, paste as new layer

Image, resize 70%

Move to the left and place behind the other package and move to the left

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 6

Edit, paste, paste as new layer

Image, resize 40%

Move to the right side of the fireplace and make it look like it is hanging from the garland

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Element 2

Edit, paste, paste as new layer

Image, resize 30%

Move to the right side and behind the tubes leg. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 11

Edit, paste, paste as new layer

Image, resize 30%

Move to the right side of the stocking behind the tube and move over some

Effects, 3D Effects, Drop shadow, same settings

Edit, copy Element 5

Edit, paste, paste as new layer

Image, Mirror

Move to the left and place in front of the presents

Effects, 3D Effects, Drop Shadow, same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Anna Liwanag. You need a license to use this tube.  You can purchase the tube at CDO

I am using the PTU kit Maryline Cazenave December 2018 bt by Ladyhawwk Designs. You can find this kit at CDO





Open new image 600 x 600

Edit, copy Frame 3

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Ele 25

Edit, paste, paste as new layer

Image,resize 70%

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 7

Edit, paste, paste as new layer

Move to the right side of the frame

Image, resize 75%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 11

Edit, paste, paste as new layer

Image, resize 50%

Move to the right side of the frame placing in front of the tree and behind the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 24

Edit, paste, paste as new layer

Image, resize 50%

Move to the left side of the package and move below it. Move til you have it the way you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 10

Edit, paste, paste as new layer

Image, resize 70%

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 20

Edit, paste, paste as new layer

Image, resize 50%

Move to the left side of the frame and place in front of the champagne bottle

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 21

Edit, paste, paste as new layer

Image, resize 50%

 Move to the left and place at the bottom of the champagne bottle behind the glass

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 2

Edit, paste, paste as new layer

Image, resize 30%

Move below the frame and make it look like they are hanging from the top of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 27

Edit, paste, paste as new layer

Image, resize 30%

Move to the left of the hanging ornaments make sure it is beneath the frame

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Keith Garvey. You need a license to use this tube.  You can purchase the tube at CDO

I am using the PTU kit Keith Garvey November 2018 bt by Ladyhawwk Designs. You can find this kit at CDO





Open new image 600 x 600

Edit, copy Frame 2

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 3

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Ele 26

Edit, paste, paste as new layer

Edit, Clear

Edit, copy Ele 27

Edit, paste, paste as new layer

Image, resize 70%

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 18

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 90%

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 9

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right of the frame

Image, rotate, free rotate, left 20

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 32

Edit, paste, paste as new layer

Image, resize 80%

Move to the bottom so that it covers up the cut off of the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 5

Edit, paste, paste as new layer

Image, Mirror

Image, resize 50%

Move to the right side of the pendant. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 7

Edit, paste, paste as new layer

Image, resize 50%

Move to the left side of the frame and move around til you have it placed how you want

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 30

Edit, paste, paste as new layer

Image, resize 50%

 Move to the left

Move up and around til you have it the way you want it placed

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 1

Edit, paste, paste as new layer

Image, resize 70%

Layers, arrange, send to bottom but than move above the glitter

Move to the left and move around til you can see the stars

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Enamorte. You need a license to use this tube.  You can purchase the tube at CDO

I am using the PTU kit IB Enamorte 48-1 by Ladyhawwk Designs. You can find this kit at CDO





Open new image 600 x 600

Edit, copy Frame 2

Edit, paste, paste as new layer

Image, resize 60%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Ele 16

Edit, paste, paste as new layer

Image, resize 80%

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, copy Ele 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 85%

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 75%

Layers, arrange, bring to top

Move to place on the frame the way you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 6

Edit, paste, paste as new layer

Image, Mirror

Image, resize 70%

Move around til you have it the way you want it.I have mine more to the right

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 1

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 50%

Image, Flip

Move to bottom of the tube so you can cover off the cut off on the botton and of the arm of the tube. I do not like the cut parts of a tube showing

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, copy Ele 4

Edit, paste, paste as new layer

Image, resize 60%

Move to the left side of the frame and move around til you have it placed how you want

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 13

Edit, paste, paste as new layer

Image, resize 60%

 Move to the left

Layers, arrange, send to bottom. Move up above the glitter level

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 3

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move to the right and place on the branches of the tree

Effects, 3D Effects, Drop Shadow, Same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Melissa Dawn. You need a license to use this tube.The tube can be purchased at CDO

I am using the PTU Kit IB Melissa Dawn 19-2 by Foxys Designz. This kit is sold at CDO

WSL Mask 216 found HERE. You can find the download link on the right side of the page





Open new image 600 x 600

Edit, copy Frame 2

Edit, paste, paste as new layer

Image, resize 60%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, copy Element 11

Edit, paste, paste as new layer

Image, Resize 80%

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Element 3

Edit, paste, paste as new layer

Image, resize 40%

Move to the right side of the tree. See my tag for placement

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Element 17

Edit, paste, paste as new layer

Image, resize 30%

Move behind the gift on the right and move to the left

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 20

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and place in front of the tree but behind the presents. Move up a little

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, Mirror

Image, resize 80%

Move around til you have the tube placed the way you wish

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 6

Edit, paste, paste as new layer

Image, resize 50%

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 4

Edit, paste, paste as new layer

Image, resize 60%

Move to the right side of the drum. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Element 2

Edit, paste, paste as new layer

Image, resize 30%

Place at the top of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 10

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place in front of the drum and behind the soldier

Effects, 3D Effects, Drop shadow, same settings

Select Raster 2

Edit, copy Element 13

Edit, paste, paste as new layer

Move to the top right of the frame

Image, rotate, free rotate, right 20

Effects, 3D Effects, Drop Shadow, same settings

Edit, copy Paper3

Edit, paste, paste as new layer

Layers, arrange, Send to bottom

Layers, Load/save mask, load mask from disk, settings:

WSL_Mask216
Source Luminance
Fit To Canvas
Invert Transparency NOT Checked
Hide All Mask

Layers, merge, merge group

Image, resize 125

Move to the left some

Layers, Duplicate

Image, Mirror

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Andrea Cernestean . You need a license to use this tube. You can buy this tube at CDO

I am using the PTU kit IB Andrea Cernestean 2-1 by Tasha's Playground. You can find this kit at CDO




Open new image 600 x 600

Edit, copy Frame 01

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 01

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, clear

Edit, copy e12

Edit, paste, paste as new layer

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e16

Edit, paste, paste as new layer

Move to the bottom of the frame and to the left

Effects, 3D Effects, Drop Shadow, same settings

Layers, Duplicate

Image, Mirror

Edit, copy e02

Edit, paste, paste as new layer

Move to the bottom right of the frame placing on the leaves and in front of the tubes arm

Image, resize 50%

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy e20

Edit, paste, paste as new layer

Image, resize 60%

Image, Mirror

Move to the left side of the frame placing on the leaves

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy e13

Edit, paste, paste as new layer

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, same settings

Layers, Duplicate

Image, Mirror

Edit, copy e11

Edit, paste, paste as new layer

Layers, arrange, bring to top

Move to the top right and place on the branches

Image, resize 30%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy e19

Edit, paste, paste as new layer

Move to the left side of the frame and move down til it is above the branches

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Edit, copy e04

Edit, paste, paste as new layer

Move to the right and move below the birds foot so it looks like the bird is holding it

Image, resize 50%

Effects, 3d Effects, Drop Shadow, Same settings

Edit, copy e01

Edit, paste, paste as new layer

Image, resize 50%

Image, Mirror

Move to the right side and place behind and to the left of the bag of nuts

Effects, 3D Effects, Drop Shadow, Same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Dirk Richter. You need a license to use this tube.  The tube can be purchased at CDO

I am using the PTU Kit IB Dirk Richter 24-3 by Foxys Designz. This kit is sold at CDO





Open new image 600 x 600

Edit, copy Frame 2

Edit, paste, paste as new layer

Image, resize 60%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 6

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Element 16

Edit, paste, paste as new layer

Move down just a bit

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, mirror

Image, Resize 60%

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, Copy Element 2

Edit, paste, paste as new layer

Image, resize 50%

Move to the top and above the frame some

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Element 3

Edit, paste, paste as new layer

Image, resize 50%

Move to the left placing in front of the tubes hand  and the popcorn box

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Move over some til they look to be right together

Edit, copy Element 15

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and move around til you have the way you want

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Select Raster 2

Edit, copy Element 6

Edit, paste, paste as new layer

Image, rotate, free rotate, left 45

Image, resize 50%

Move to the bottom right. Move around til you have it the way you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 14

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom of the frame and move to the left

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Element 12

Edit, paste, paste as new layer

Image, resize 30%

Move to the left side of the tube and behind the arm and over some. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, copy Element 10

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and move up some and move around til you have it the way you want it placed

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Wordart 1

Edit, paste, paste as new layer

Layers, Arrange, bring to top

Image, resize 60%

Place on the popcorn

Effects, 3D Effects, Drop shadow, same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Sarah Richter. You need a license to use this tube.  The tube can be purchased at CDO

I am using the PTU Kit IB Sarah Richter 3-3 by Foxys Designz. This kit is sold at CDO




Open new image 600 x 600

Edit, copy Frame 2

Edit, paste, paste as new layer

Image, resize 50%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Element 1

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Select Raster 2

Edit, copy Element 2

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place on the right side of the flower and move down a little

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 3

Edit, paste, paste as new layer

Image, resize 30%

Move down to the bottom and place behind the white flower on the right side and move down some

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate the first element

Layers, Duplicate the second element

Move these two flowers around til you have them all situated in the places you want them along the bottom of the frame

Select Raster 2

Edit, copy Element 7

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and move down behind the flowers

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 8

Edit, paste, paste as new layer

Image, resize 50%

Move to the bottom left of the frame placing behind the flower

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 65%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Element 18

Edit, paste, paste as new layer

Image, resize 70%

Move to the left

Layers, arrange, send to bottom

Move to the left and pull out so you can see it beneath the flowers. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Element 14

Edit, paste, paste as new layer

Layers, Arrange, bring to top

Image, resize 30%

Place on the branch from the tube

Effects, 3D Effects, Drop shadow, same settings

Edit, copy Element 13

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place behind the flowers and put in front of the tube. See my tag for placement

Effects, 3D effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 20

Edit, paste, paste as new layer

Image, resize 40%

Move to the top left of the frame

Effects, 3D effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 11

Edit, paste, paste as new layer

Move down to the bottom of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Caron Vinson. You need a license to use this tube. You can buy this tube at CDO

I am using the PTU kit Say You Say Me by Sweet Cravings Scraps. You can buy the kit at TKO Scraps  and Mystical Scraps





Open new image 600 x 600

Edit, copy Frame 2

Edit, paste, paste as new layer

Image, resize 50%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 8

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Tree

Edit, paste, paste as new layer

Image, resize 55%

Image, Mirror

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Leaf 4

Edit, paste, paste as new layer

Image, resize 20%

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Than move up and place above the tree trunk

Select Raster 2

Edit, copy Flower Petal 1

Edit, paste, paste as new layer

Image, resize 20%

Move to the right and place below the leaf on the left side

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Move above the tree trunk and behind the leaf

Layers, Duplicate

Move to the right some

Layers, Duplicate and move to the right. Keep doing this til you are behind the tube than move to duplicate the original petal and duplicate til you have it across to behind the tube

Edit, Copy Bucket

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place in front of the leaves and petal

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Pumpkin 2

Edit, paste, paste as new layer

Image, resize 30%

Move to the left side of the bucket

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Acorn

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place in front of the bucket and in part of it is in front of the pumpkin

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Fox and Baby 2

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place on the leaves and behind the tubes legs

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, copy Leaf Berry

Edit, paste, paste as new layer

Image, resize 60%

Move to the right side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Owl

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 10%

Move to the left and sit on one of the tree branches in front of the tree

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, copy Leaf 2

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place above the berry and move til the right some

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Select Raster 2

Edit, copy Pumpkin 1

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and move around til you can see it above the bucket

Effects, 3D effects, Drop Shadow, Same Settings

Edit,copy Flower 2

Edit, paste, paste as new layer

Image, Mirror

Image, resize 30%

Move to the right and place behind the leaf and in front of the red berries

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy DragonFly

Edit, paste, paste as new layer

Layers, arrange, bring to top

Move to the left and place on the acorn

Image, resize 20%

Effects. 3D effects. Drop Shadow, Same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Dirk Richter.  You need a license to use this tube. You can buy this tube at CDO

I am using the PTU Kit IB Dirk Richter 24-2  by Schnegge’s Scraps. This kit is sold at CDO




Open new image 600 x 600

Edit, copy Frame 02

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 04

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 11

Edit, paste, paste as new layer

Image, resize 65%

Move to the right side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 10

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place in front of the lighting at the bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Ele 19

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange, send to bottom

Move around til you  have it the way you want it

Effects, 3D effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Image, Flip

Select Raster 2

Edit, copy Ele 17

Edit, paste, paste as new layer

Image, Mirror

Image, resize 50%

Move to the top left of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 01

Edit, paste, paste as new layer

Move to the right and place behind the film but in front of and to the left side of the lighting

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 07

Edit, paste, paste as new layer

Image, Mirror

Move to the bottom left of the frame

Image, resize 50%

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 16

Edit, paste, paste as new layer

Image, resize 70%

Move to the bottom of the frame and move to the left

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Elias Chatzoudis. You need a license to use this tube. You can buy this tube at CDO

I am using the PTU kit IB Elias Chatzoudis 188-3 by Tasha's Playground. You can find this kit at CDO




Open new image 600 x 600

Edit, copy Frame 02

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 02

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, clear

Edit, copy e08

Edit, paste, paste as new layer

Move around just a little bit and move up some

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, Copy e04

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move over to the right and up some. Keep moving til it is where you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Image, Flip

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 70%

Layers, arrange, bring to top

Effects, 3D Effects, Drop Shadow, same settings

Select Raster 2

Edit, copy e10

Edit, paste, paste as new layer

Move to the bottom right of the frame

Image, resize 70%

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy e02

Edit, paste, paste as new layer

Image, resize 60%

Place on the stone fire place

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy e12

Edit, paste, paste as new layer

Move to the left side of frame and move up some

Effects, 3D Effects, Drop Shadow, same settings

Edit, copy e14

Edit, paste, paste as new layer

Image, Mirror

Move to the left and place on the right side of the tree but on the left side of the tube. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy e17

Edit, paste, paste as new layer

Move to the left side of the house placing on the left edge covering that and the tree branch

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy e15

Edit, paste, paste as new layer

Move to the left and place behind the black pumpkin and move to the right some

Image, resize 50%

Effects, 3d Effects, Drop Shadow, Same settings

Edit, copy e20

Edit, paste, paste as new layer

Layers, arrange,bring to top

Image, resize 70%

Move to the right side of the cauldron

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy e04

Edit, paste, paste as new layer

Image, resize 70%

Move to the right and place behind and up a little behind the previous element

Effects, 3D Effects, Drop Shadow, Same settings

Edit copy e16

Edit. Paste, paste as new layer

Image, resize 70%

Image, Mirror

Move to the right and move behind the other two bottles. Move around til you have it the way you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Keith Garvey. You need a license to use this tube.  You can purchase the tube at CDO

I am using the PTU kit Keith Garvey Package 76 by Ladyhawwk Designs. You can find this kit at CDO





Open new image 600 x 600

Edit, copy Ele 53

Edit, paste, paste as new layer

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, copy Ele 55

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move up some to place the way you wish

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 57

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right in front of the clouds

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 60%

Layers, arrange, bring to top

Move in front of the element

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 38

Edit, paste, paste as new layer

Image, resize 40%

Move to place in front of the cut off legs of the tube. I do not like to leave them showing so always try to hide them when I can

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 43

Edit, paste, paste as new layer

Image, resize 40%

Move to the right side of the tube, right behind the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Layers, merge, merge down

Layers, Duplicate

Image, Mirror

Edit, copy Ele 60

Edit, paste, paste as new layer

Image, resize 40%

 Place above the leaves

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Ele 46

Edit, paste, paste as new layer

Image, resize 40%

Layers, arrange, bring to top

Move to the bottom left of the tube

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 48

Edit, paste, paste as new layer

Image, resize 30%

Move to the top right placing in front of the moon

Effects, 3D Effects, Drop Shadow, Same Settings

Edit,copy Ele 20

Edit, paste, paste as new layer

Image, resize 50%

Move to place at the bottom right behind the flowers and leaves

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 7

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and place behind the snake and flowers

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 44

Edit, paste paste as new layer

Image, resize 30%

Move to the top left and place where you wish

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 41

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 75%

Move around til you have it the way you want it

Effects, 3D Effects, Drop Shadow

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Keith Garvey. You need a license to use this tube.  You can purchase the tube at CDO

I am using the PTU kit Keith Garvey Package 76 by Ladyhawwk Designs. You can find this kit at CDO





Open new image 600 x 600

Edit, copy Frame 4

Edit, paste, paste as new layer

Image, resize 60%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 2

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 11

Edit, paste, paste as new layer

Image, resize 60%

Move to the right side of the frame behind the tube. Move around til you have the bat placed where you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 41

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 60%

Move toward the top of the frame and move above some

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Flip

Edit, copy Ele 64

Edit, paste, paste as new layer

Image, resize 60%

Image, rotate, free rotate, right 90

Move to the left placing above the layer you just put there

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Image, Flip

Edit, copy Ele 63

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 40%

Move to the bottom right side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Ele 65

Edit, paste, paste as new layer

Image, resize 30%

 Move behind the flower on the left and in front of the cut off legs of the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Select Raster 2

Edit, copy Ele 61

Edit, paste, paste as new layer

Image, resize 50%

Move to the left side of the frame placing behind the tube and move around til you have it the way you want them placed

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Edit, copy Ele 43

Edit, paste, paste as new layer

Image, resize 60%

Move to the right and move down above the mask layer and move up and to the right some. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Keith Garvey. You need a license to use this tube.  You can purchase the tube at CDO

I am using the PTU kit Keith Garvey Package 76 by Ladyhawwk Designs. You can find this kit at CDO





Open new image 600 x 600

Edit, copy Frame 5

Edit, paste, paste as new layer

Image, resize 50%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 12

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 50
Blur: 6
Color: Black
Shadow on new layer NOT Checked

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 24

Edit, paste, paste as new layer

Image, resize 65%

Layers, arrange, send to bottom

Move around til you have it the way you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Image,Flip

Select Raster 2

Edit, copy Ele 12

Edit, paste, paste as new layer

Image, resize 50%

Move to the top of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Ele 61

Edit, paste, paste as new layer

Image, resize 60%

Move to the left side of the frame and move around til you have it where you want it

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Edit, copy Ele 23

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom left behind the tubes foot and at the bottom of the flowers

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Elias Chatzoudis. You need a license to use this tube.  The tube can be purchased at CDO

I am using the PTU Kit IB Elias Chatzoudis 88-3 Foxys Designz. This kit is sold at CDO 




Open new image 600 x 600

Edit, copy Frame 1

Edit, paste, paste as new layer

Image, resize 60%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 5

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit,copy Element 17

Edit, paste, paste as new layer

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Element 14

Edit, paste, paste as new layer

Image, resize 70%

Move to the bottom of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 70%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 1

Edit, paste, paste as new layer

Move to the left side of the tag behind the tube and in front of the grass

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 13

Edit, paste, paste as new layer

Image, Flip

Image, resize 70%

Move to the right and place at the top of your frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Element 15

Edit, paste, paste as new layer

Image, Mirror

Image, resize 40%

Move to the bottom left of the frame placing beneath the pumpkin

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 7

Edit, paste, paste as new layer

Move to the left and place in front of the pumpkin but behind the tubes leg

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Element 4

Edit, paste, paste as new layer

Image, resize 50%

Image, Mirror

Move to the right placing behind the tube and in front of the grass. Move over to the right some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 16

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place behind the pumpkin and move down and around so you can see the leaf

Effects, 3D Effects, Drop shadow, same settings

Edit, copy Element 10

Edit, paste, paste as new layer

Image, resize 80%

Move to the right and place behind the pumpkin and leaf and move to the right edge of the frame some. See my tag for placement

Effects, 3D effects, Drop Shadow, Same Settings

Edit, copy Wordart 1

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange, bring to top

I did a manual color correction to the wordart for it to stick out more. You can do this by

Adjust, Color Balance, Manual Color Correction make sure manual target color is selected. Source is black and target is the color you want to change to

I think did a Selections, Select All, Float Defloat on the wording. Expanded by 2 , layers, new raster layer, move down the layer than floodfill with black. Selections, Select none

Effects, 3D effects, Drop Shadow, Same Settings

I added a paper, sent it to the bottom and used a mask. You can use anyone you want.

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Elias Chatzoudis.  You need a license to use this tube. You can buy this tube at CDO

I am using the PTU Kit IB Elias Chatzoudis 85-3  by Schnegge’s Scraps. This kit is sold at CDO




Open new image 600 x 600

Edit, copy Frame 01

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 01

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Ele 07

Edit, paste, paste as new layer

Image, resize 70%

Move down and around some til you have it the way you want

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, copy Ele 20

Edit, paste, paste as new layer

Image, resize 60%

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 01

Edit, paste, paste as new layer

Image, resize 50%

Move to the left placing in front of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Move to tube over to look to be sitting on the edge

Edit, Copy Ele 21

Edit, paste, paste as new layer

Image, resize 60%

Move to the left side of the frame moving up to be behind the tube and tree

Effects, 3D effects, Drop Shadow, Same Settings

Layers, arrange, send to bottom so it is behind the tube and tree. Than move around til you have it the way you want it

Select Raster 2

Edit, copy Ele 10

Edit, paste, paste as new layer

Image, resize 60%

Move to the right side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 08

Edit, paste, paste as new layer

Image, resize 50%

Move to the right

Place in front of the cross

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 02

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 40%

Move to place on the right side of the coffin behind the tube. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ele 04

Edit, paste, paste as new layer

Image, resize 50%

Move in front of the cross and behind the skulls

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Ele 05

Edit, paste, paste as new layer

Image, resize 30%

Move to the left side of the cat placing behind the cat and in front of the coffin

Effects, 3D Effects, Drop Shadow, Same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Maryline Cazenave. You need a license to use this tube.  The tube can be purchased at CDO

I am using the PTU Kit Maryline Cazenave Package 85 by Foxys Designz. This kit is sold at CDO





Open new image 600 x 600

Edit, copy Frame 4

Edit, paste, paste as new layer

Image, resize 50%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 2

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Tube

Edit, paste, paste as new layer

Image, Mirror

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, same Settings

Select Raster 2

Edit, copy Element 15

Edit, paste, paste as new layer

Image, resize 50%

Move to the left side of the frame behind the dog

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 20

Edit, paste, paste as new layer

Move to the right side of the frame

Image, resize 50%

Move to look like it is leaning against the dog

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 50

Edit, paste, paste as new layer

Move to the top left of the frame

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Layers, merge, merge down

Layers, Duplicate

Image, Flip

Edit, copy Element 1

Edit, paste, paste as new layer

Image, resize 40%

Move to the right placing under the dogs paw and the stick pin doll

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 13

Edit, paste, paste as new layer

Move to the right side of the frame behind the doll and move over to the right some

Image, resize 50%

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, copy Element 12

Edit, paste, paste as new layer

Image, resize 60%

Move to the left side of the frame and move around til you have it the way you want it

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 49

Edit, paste, paste as new layer

Image, resize 50%

Layers, arrange, send to bottom

Than move above the blood layer

Move over to the left

Effects, 3D Effects, Drop shadow, same settings

Layers, Duplicate

Image, Mirror

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Maryline Cazenave. You need a license to use this tube.  The tube can be purchased at CDO

I am using the PTU Kit Maryline Cazenave Package 85 by Foxys Designz. This kit is sold at CDO





Open new image 600 x 600

Edit, copy Frame 7

Edit, paste, paste as new layer

Image, resize 50%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 6

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : 2
Horizontal: 2
Opacity: 65
Blur: 5
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Tube

Edit, paste, paste as new layer

Image, Mirror

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, same Settings

Select Raster 2

Edit, copy Element 4

Edit, paste, paste as new layer

Image, resize 60%

Move to the left side of the frame behind the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 2

Edit, paste, paste as new layer

Move to the left side of the frame in front of the cabinet placing on the bottom left

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Element 14

Edit, paste, paste as new layer

Move to the bottom right of the frame

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 51

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 40%

Move to the left and place in front of the tubes glass

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Element 19

Edit, paste, paste as new layer

Move to the right side of the cabinet door behind the bottles of the tube

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, copy Element 25

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings