Thursday, January 30, 2014

Cute & Happy PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.




I am using the artwork of Cute Loot. You need a license to use these tubes. You can purchase the tube at The PSP Project

I am using the PTU kit My Cutie Kei by Gimptastic Scraps . This kit is exclusive to The PSP Project  




Open new image 600 x 600

Edit, Copy Frame 1

Edit, paste, paste as new layer

Image, resize 80%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 8

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Bubbles

Edit, paste, paste as new layer

Move over to the left and down some so you can see 2 big bubbles

Edit, Clear

Selections Select None

Layers, Duplicate

Image, Mirror

Image, Flip

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Halftone

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 80%

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Label 1

Edit, paste, paste as new layer

Layers, arrange, bring to top

Move to the top right of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy BoomBox

Edit, paste, paste as new layer

Image, resize 80%

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy  Tapes

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place at the bottom left of the boombox

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bag

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Present

Edit, paste, paste as new layer

Image, resize 60%

Move to the right and move down and to the right behind the bag

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Pin

Edit, paste, paste as new layer

Image, resize 60%

Move to the right and place behind the bag and to the left side of the present

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Lollipop

Edit, Paste, Paste as new layer

Image, resize 60%

Move to far right of frame and place behind the present

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Wire Flower

Edit, paste, paste as new layer

Image, Flip

Move to the left side of the frame. Move down til it is on Raster 2

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Jelly Shoes

Edit, Paste, Paste as new layer

Image, resize 60%

Layers, arrange, bring to top

Move to the right and place in front of the bag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Legs

Edit, paste, paste as new layer

Image, resize 70%

Keep moving down til you have it above the bubble layers and below raster 2. Move to the left and place halfway between the top and bottom of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bunny

Edit, paste, paste as new layer

Image, resize 60%

Layers, arrange, bring to top

Move to the bottom of the tag and place to the right of the boombox

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Heart

Edit, paste, paste as new layer

Image, resize 60%

Move to the top left and place in the center of the flower

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Table

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place to the far left behind the boombox but above the wire flower

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bear

Edit, paste, paste as new layer

Image,  resize 40%

Move to the left and make it look like it is setting on the left side of the boombox

Effects, 3d Effects, Drop Shadow, Same settings

Edit, Copy Frog

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom right and place to the right side of the bag

Effects, 3D Effects, Drop Shadow, same settings

Get your Label  that says cutie and bring it down to the bottom of the frame to place near the bottom of the frame. See my tag for placement

Edit, copy Tube

Edit, Paste, paste as new layer

Image, resize 60%

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Arrow

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right corner of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Sunglasses

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place on the bag. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Star Swirl

Edit, Paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 80%

Move to the left some

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Image, Flip

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Sunday, January 26, 2014

Attracted To The Dark Side PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of PinupToons. You need a license to use these tubes. You can purchase the tube at CDO 

I am using the PTU kit My Wicked Attraction by Gimptastic Scraps . This kit is exclusive to The PSP Project  




Open new image 600 x 600

Edit, Copy Frame 2

Edit, paste, paste as new layer

Image, resize 80%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 5

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Moon

Edit, paste, paste as new layer

Move to the top left of the tag

Image, resize 80%

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Blood Drips

Edit, paste, paste as new layer

Move to the left and move below the moon

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Wire

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy  Bloody heart

Edit, paste, paste as new layer

Image, resize 70%

Layers, arrange, bring to top

Move to the left and place at the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Candle

Edit, paste, paste as new layer

Move to the right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Blades

Edit, paste, paste as new layer

Image, resize 65%

Move to the right and place behind the heart

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Stake

Edit, paste, paste as new layer

Image, Mirror

Image, Flip

Image, Mirror

Image, resize 60%

Move to the left and place in front of the heart

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Blood Vial

Edit, Paste, Paste as new layer

Image, rotate, free rotate, right, 15

Move to left and place behind the heart on the left

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bottle

Edit, paste, paste as new layer

Move to the right and place on the right side of the candle. See my tag for placement

Image, Resize 70%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Skull

Edit, Paste, Paste as new layer

Image, resize 80%

Move to the right and place to the right of the bottle

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Sign

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom and place at the base of the tube to cover up the cut off legs

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Blindfold

Edit, paste, paste as new layer

Move to the right and place it on the skull. See my tag for placement

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Scithe

Edit, paste, paste as new layer

Move to the top right of the frame

Image, Mirror

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tickle Whip

Edit, paste, paste as new layer

Image, rotate, free rotate, left, 95

Move to raster 2 and to the right. See my tag for placement

Effects, 3d Effects, Drop Shadow, Same settings

Edit, Copy Whip

Edit, paste, paste as new layer

Image, Flip

Image, resize 80%

Move to place on the Wicked Attraction sign

Effects, 3D Effects, Drop Shadow, same settings

Edit, copy WA

Edit, Paste, paste as new layer

Image, resize 70%

Move to the left and put on the moon

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Fence

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move up one spot

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 3

Edit, copy Cage

Edit, paste, paste as new layer

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Thursday, January 23, 2014

Party At Love Lane PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.


I am using the artwork of Verymany You need a license to use this tube. You can buy this tube at PFD

I am using the PTU kit Valentine's Day Party by Tasha's Playground. You can find where to purchase the kit HERE



Open new image 600 x 600

Edit, Copy Frame 3

Edit, paste, paste as new layer

Image, resize 80%

With your magic wand click inside each of the frames

Selections, Modify, Expand by 6

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Sparkles 2

Edit, paste, paste as new layer

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Swirl

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move up some on the left

Effects, 3D Effects Drop Shadow, same settings

Layers, Duplicate

Image, Mirror

Image, Flip

Edit, Copy Swirl 2

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Sign

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 75%

Move to the right and place on the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy  Tube

Edit, paste, paste as new layer

Image, Mirror

Image, resize to fit your tag

Move to the place at the bottom of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Gift

Edit, paste, paste as new layer

Image, resize 75%

Move to the left to the bottom left. Move behind the tubes legs

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Heart Tin

Edit, paste, paste as new layer

Image, resize 65%

Move to the right of the gift. Move down so you won't see the Be Mine

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Heart Tin 2

Edit, paste, paste as new layer

Image, resize 60%

Move to the right and place in front of the sign but behind the tube's head

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Love Letter

Edit, Paste, Paste as new layer

Image, resize 60%

Move to place in front of Heart Tin 1

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Balloon

Edit, paste, paste as new layer

Move to the left of the frame. Move til the string is on Raster 2

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Cupids Bow

Edit, Paste, Paste as new layer

Layers, arrange, bring to top

Place in the middle of the frame at the top

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

V Day Party FTU Cluster Frame

V Day Party FTU Cluster Frame using the PTU Kit Valentine's Day Party by Tasha's Playground. Tasha no longer sales kits.

Wednesday, January 22, 2014

Candy Kisses PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Pinuptoons. You need a license to use his tubes. You can buy his artwork at CDO

I am using the PTU kit Kisses Like Candy by Freek's Creations. You can buy the kit at Mystical Scraps





Open new image 600 x 600

Edit, Copy Frame

Edit, paste, paste as new layer

Image, resize 60%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Sparkles 2

Edit, paste, paste as new layer

Move around some to put in frame as you wish

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Lights

Edit, paste, paste as new layer

Move to the top of the frame

Image, resize 70%

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Tree

Edit, paste, paste as new layer

Move to the left side of the frame

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Sparkles

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move toward the top of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, flip

Image, Mirror

Edit, copy  Chocolate Box

Image, resize 40%

Layers, arrange, bring to top

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Candle

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place behind the chocolate box and to the right some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bon Bons

Edit, paste, paste as new layer

Image, resize 30%

Move to the right, move up and on the right side of the Bon Bons

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Chocolate Kiss

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place near the bottom of the chocolate box

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Cupcake

Edit, Paste, Paste as new layer

Image, resize  50%

Move to the right and place behind the chocolate box and to the left of the candle

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Flower Box

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and place at the bottom of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, Paste, Paste as new layer

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Candy Heart

Edit, Paste, paste as new layer

Move to top right corner of the frame

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Love Potion

Edit, paste, paste as new layer

Move to the left and place in front and to the right some of the flower box

Image, resize 50%

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Tuesday, January 21, 2014

Garnet Too PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.




I am using the artwork of Zlata_M. You need a license to use these tubes. You can purchase the tube at PFD

I am using the PTU kit My Birthstone Series: Garnet by Gimptastic Scraps .  Amy no longer sells kits.

This is the start of a series of kits by Gimptastic Scraps & Tasha's Playground





Open new image 600 x 600

Edit, Copy Frame 4

Edit, paste, paste as new layer

Image, resize 75%

With your magic wand click inside the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Glitter

Edit, paste, paste as new layer

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Deco 3

Edit, paste, paste as new layer

Move to the top of the frame

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Suitcase

Edit, paste, paste as new layer

Move to the left bottom of the frame

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Box

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and place behind the suitcase and to the left

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy  Bottle

Image, resize 80%

Move to the left and place between the suitcase and box

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bust

Edit, paste, paste as new layer

Image, resize 70%

Move to the right bottom corner of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Pillow

Edit, paste, paste as new layer

Image, resize 80%

Image, rotate, free rotate, right 15

Move to the right behind the bust than move to the left some

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Apples

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 60%

Move to the left and place on top of the suitcase

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, Paste, Paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Leaf

Edit, paste, paste as new layer

Image, resize 60%

Move to the top right of the frame

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy Ribbon

Edit, Paste, Paste as new layer

Layers, arrange, move up to Raster 2

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy Charm

Edit, Paste, paste as new layer

Move to place at the bottom of the Bust

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Garnet PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.




I am using the artwork of Di_Halim. You need a license to use this tube. You can buy this tube at PFD

I am using the PTU kit Birthstone Series: Garnet by Tasha's Playground.  Tasha no longer sells kits.

This kit is going to be a series between Tasha and Gimptastic Scraps.




Open new image 600 x 600

Edit, Copy Frame 1

Edit, paste, paste as new layer

Image, resize 85%

With your magic wand click inside the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Swirl

Edit, paste, paste as new layer

Move to the left of the frame

Edit, Clear

Selections Select None

Layers, Duplicate

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Clock 1

Edit, paste, paste as new layer

Image, resize 75%

Move to the left side of the frame

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Lamp

Edit, paste, paste as new layer

Move to the right side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Chair

Edit, paste, paste as new layer

Image, resize 75%

Move to the right and place in front of the lamp

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Chain

Image, resize 75%

Image, Flip

Move to the top of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Layers, Duplicate

Layers, Arrange, bring to top

Use your eraser tube to erase most all of the frame except for what will cover the cut off portion of the legs on the tube. After doing this I than moved the chair and clock up to go above the frame that you kept

Edit, copy Butterfly 1

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and place it on the lamp

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Phone

Edit, paste, paste as new layer

Move to the left and place on the base of the clock

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Select Key

Image, rotate, rotate clockwise 90

Edit, Copy Key

Edit, Paste, Paste as new layer

Move to the left and place at the base of the clock

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Ribbon

Edit, paste, paste as new layer

Move to the left and place at the top part of the key. Make it look like it is around the circle with the ribbons circle

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Jewels

Edit, Paste, Paste as new layer

Layers, arrange, send to bottom

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Garnet FTU Cluster Frame

Garnet FTU Cluster Frame using the PTU Kit Birthstone Series: Garnet by Tasha's Playground.  Tasha no longer sells kits.

Monday, January 20, 2014

Valentines Sucks PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of BamBam You need a license to use this tube.  This tube was one that was purchased at PTE. You can buy his tubes at CDO

I am using the PTU kit Screw Valentines by Manipulated by Magik. You can buy this kit exclusively at PFD and Mystical Scraps and Thrifty Scraps

Template 482 by Millie found HERE




Open template

Duplicate and close original

Delete cr and Background

Image, resize to 600 width as the height will adjust

Image, canvas size 625 x  600

Select  1

Selections, Select All, Float, Defloat

Edit, copy Paper 5

Edit, paste, paste as new layer.

Selections, Invert

Edit, clear

Selections, Select None

Effects, 3D Effects, Drop Shadow, settings of:
Vertical: -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Delete 1

Select  2

Selections, Select All, Float, Defloat

Edit, copy Paper 6

Edit, paste, paste as new layer

Selections, Invert

Edit, Clear

Selections, Select None

Effects, 3D Effects, Drop Shadow, Same Settings

Delete 2

Select  3

Selections, Select All, Float, Defloat

Edit, copy Paper 2

Edit, paste, paste as new layer

Selections, Invert

Edit, Clear

Selections, Select None

Effects, 3D Effects, Drop Shadow, Same settings

Delete 3

Select  4

Selections, Select All, Float, Defloat

Edit, copy Paper 1

Edit, paste, paste as new layer

Selections, Invert

Edit, Clear

Selections, Select None

Effects, 3D Effects, Drop Shadow, Same settings

Delete 4

Select  5

Selections, Select All, Float, Defloat

Edit, copy Paper 10

Edit, paste, paste as new layer

Selections, Invert

Edit, Clear

Selections, Select None

Effects, 3D Effects, Drop Shadow, Same settings

Delete  5

Select  6

Selections, Select All, Float, Defloat

Edit, copy Paper 1

Edit, paste, paste as new layer

Selections, Invert

Edit, Clear

Selections, Select None

Effects, 3D Effects, Drop Shadow, Same settings

Delete 6

Edit, copy Tube

Edit, paste, paste as new layer

Move to the left some. See my tag for placement

Image, resize 85%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Broken Heart

Edit, paste, paste as new layer

Move to the right and place behind the tube. See my tag for placement

Image, resize 60%

Effects, 3D Effects, Drop shadow, Same settings

Edit, Copy Skulls

Edit, paste, paste as new layer

Move to the left and place next to the tut. See my tag for placement

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Deco

Edit, paste, paste as new layer

Move below the skulls

Move to the bottom of the tube and cover the cut off legs as I can't stand for those to show

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Eff You

Edit, paste, paste as new layer

Move to the left and place behind the skulls and to the left

Image, resize 70%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bleeding Rose

Edit, Paste, paste as new layer

Image, rotate, free rotate, right, 15

Image, resize 70%

Move to the right and place behind the tube and make sure the stem is hidden behind a part of the deco

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Cross

Edit, Paste, paste as new layer

Move to the left and place behind the skull..Move up to the top of the tag. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit,copy Bomb

Edit, Paste, Paste as new layer

Image, Mirror

Move to the right and place to the far right of the template. See my tag for placement

Image, resize 50%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Voodoo Doll

Edit, Paste, paste as new layer

Image, mirror

Image, resize 50%

Move to the right and place to the left of the bomb. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tray

Edit, paste, paste as new layer

Image, resize 70%

Move to place at the bottom of the tube in between the skull and voodoo doll

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Skull Scatter

Edit, paste, paste as new layer

Layers, Arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Drink

Edit, Paste, paste as new layer

Layers, arrange, bring to top

Move down til it is behind the left side of the tube and to the left. See my tag for placement. I place it  to look like the bleeding heard was bleeding into the drink

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

My Tag is just a guide

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG







Dotty Valentine PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Enamorte. You need a license to use these tubes. You can purchase the tube at CDO 

I am using the PTU kit My Dotty Valentine by Gimptastic Scraps . This kit is exclusive to The PSP Project  and Thrifty Scraps

Be My Valentine Font found HERE



Open new image 600 x 600

Edit, Copy Frame 1

Edit, paste, paste as new layer

Image, resize 75%

With your magic wand click inside each of the frames

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Love

Edit, paste, paste as new layer

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Frame 6

Edit, paste, paste as new layer

Image, resize 80%

Place below Raster 2

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Scatter

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, flip

Image, Mirror

Select Raster 3

Edit, Copy Bubbles

Edit, paste, paste as new layer

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tubes

Edit, paste, paste as new layer

Layers, arrange, bring to top

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Heart Ribbon

Edit, paste, paste as new layer

Move down to raster 2 and place to the top left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Move down so the duplicate will be below the original ribbon

Edit, copy Dots

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Heart Wire

Edit, paste, paste as new layer

Layers, arrange, bring to top

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Arrow

Edit, Paste, Paste as new layer

Move to place on the duplicate ribbon frame. Make sure it is laying on top of it

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy Cupid

Edit, paste, paste as new layer

Move to the right and place behind the tube

Image, resize 80%

Image, resize 80% again

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Jar

Edit, Paste, Paste as new layer

Move to the left of the tube. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Present

Edit, paste, paste as new layer

Move to the right and place in front of the jar

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Hearts

Edit, paste, paste as new layer

Move to the left and place behind the jar

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Heart Candies

Edit, paste, paste as new layer

Move to the left and place in front of the present

Image, resize 80%

Edit, copy Key

Edit, paste, paste as new layer

Move to the left and place on top of the heart candies

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Sunday, January 19, 2014

Love Birds PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Anna Liwanag You need a license to use this tube. I bought this tube at PTE but you can buy her tubes at CDO

I am using the PTU kit Love Birds by Tasha's Playground. You can find where to purchase the kit HERE

Love Me Again Found HERE





Open new image 600 x 600

Edit, Copy Frame 2

Edit, paste, paste as new layer

Image, resize 75%

With your magic wand click inside each of the frames

Selections, Modify, Expand by 8

Edit, copy Paper 11

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Sparkles

Edit, paste, paste as new layer

Edit, Clear

Select Doodle

Image, rotate, rotate, clockwise, 90

Edit, Copy Doodle

Edit,paste, paste as new layer

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Border

Edit, paste, paste as new layer

Image, resize 85%

Place in the middle of the frame. See my tag for placement

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Tree

Edit, paste, paste as new layer

Image, resize 85%

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Banner

Edit, paste, paste as new layer

Image, resize 70%

Move to raster 2 and move to the top of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bird 2

Edit, paste, paste as new layer

Image, Mirror

Image, resize 40%

Layers, arrange, bring to top

Place on the top of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Flowers

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place at the bottom of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Select Branch

Image, rotate, rotate, counterclockwise 90

Edit, copy Branch

Edit, paste, paste as new layer

Image, resize 70%

Image, Mirror

Move to the right side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Bird 1

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place at the top of the branch

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Swirl

Edit, Paste, Paste as new layer

Move to the top of the frame

Layers, arrange, send to bottom. You should be able to see it above the back of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Love Trail

Edit, paste, paste as new layer

Move up til it is above Raster 2

Image, resize 90%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bird 4

Edit, Paste, Paste as new layer

Image, resize 50%

Move to the far right and make it look like it is hanging from the tree branch

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 85%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Wordart

Edit, paste, paste as new layer

Image, resize 50%

Move to the bottom of the frame. I did this so that since the tube was cut off legs it would hide that

Effects, 3D Effects, Drop Shadow, Same Settings

Open the mask in PSP that is in the kit

Edit, Copy Paper 6

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Layers, New Mask Layer, From Image

Under Source window select Mask

Source Luminance Checked and click okay

Layers, merge, merge group

Use your move tool and move up some

Layers, merge, merge group

Edit, copy Locket

Edit, paste, paste as new layer

Move down til it is placed above the border layer

Image, resize 70%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Key

Edit,paste, paste as new layer

Move to the left and place on the left of the locket

Image, resize 70%

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Love Birds FTU Cluster Frame

Love Birds FTU Cluster Frame using the PTU Kit Love Birds by Tasha's Playground. Tasha no longer sales kits.


Saturday, January 18, 2014

Midnight PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.

I am using the artwork of Zebrush You need a license to use this tube. This was given away as a gift to customers for buying a certain amount of tubes in a month at PFD

I am using the PTU kit Midnight Rendezvous by Tasha's Playground. You can find this kit at CDO




Open new image 600 x 600

Select Frame 4

Image, rotate, rotate clockwise 90

Edit, Copy Frame 4

Edit, paste, paste as new layer

Image, resize 85%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 8

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Glow

Edit, paste, paste as new layer

Edit, Clear

Edit, Copy Sparkles 2

Edit,paste, paste as new layer

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, copy Wall

Edit, paste, paste as new layer

Image, resize 80%

Image, rotate, free rotate, left, 25

Move down to the bottom of the frame

Effects, 3D Effects Drop Shadow, same settings

Edit, Copy Castle

Edit, paste, paste as new layer

Image, resize 65%

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Moon

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place behind the castle

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Car

Edit, Paste, Paste as new layer

Layers, arrange, bring to top

Image, resize 60%

Move to place in front of the castle

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Cloud

Edit, paste, paste as new layer

Move down to raster 2 and place at the top of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tree 1

Edit, paste, paste as new layer

Move to the right of the frame

Layers, arrange, bring to top

Image, resize 85%

Image, rotate, free rotate, left, 10

Move up til the Limbs are on the cloud, moon and castle some but the bottom is behind the wall

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bird

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place on the moon to the left

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Leaves 1

Edit, paste, paste as new layer

Move to place near the bottom of the wall

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Leaves 3

Edit, Paste, Paste as new layer

Move to the right and place on the branches of the tree to make it look like they are having from the tree

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Dots

Edit, paste, paste as new layer

Image, resize 80%

Keep moving down til it is behind the tree but in front of the cloud

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, Paste, Paste as new layer

Image, resize to fit the tag you are making

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same Settings

Now since the tube is one that has cut off legs(which I don't care for) move the car over and place it in front of the legs to look like she is standing behind the car

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Midnight Rendezvous FTU Cluster Frame

Midnight Rendezvous FTU Cluster Frame using the PTU Kit Midnight Rendezvous by Tasha's Playground. Tasha no longer sales kits.

Friday, January 17, 2014

Devil In A Red Dress PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.


I am using the artwork of Tony Tzanoukakis. You need a license to use this tube. You can buy this tube at his store found HERE

I am using the PTU kit Devil Woman by Sweet Cravings Scraps. You can buy the kit at TKO Scraps, Exquisite Scraps, and Scraps & Tubes


Open new image 600 x 600

Edit, Copy Frame 6

Edit, paste, paste as new layer

Image, resize 65%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Fire

Edit, paste, paste as new layer

Image, resize 65%

Move toward the bottom of the frame some

Edit, Clear

Edit, Copy Gate

Edit,paste, paste as new layer

Move to the bottom of the frame. See my tag for placement

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Frame 5

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 70%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Glitter Trail

Edit, paste, paste as new layer

Image, resize 90%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Scattered Hearts

Edit, Paste, Paste as new layer

Image, resize 75%

Layers, arrange, send to bottom

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Cloudy Heart Moon

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 40%

Move to the top left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Car

Edit, paste, paste as new layer

Image, resize 60%

Move to place at the bottom of the frame so as to cover up the cut off legs of the tube

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Pitch Fork

Edit, paste, paste as new layer

Image, resize 65%

Move to the left and than move down til it is behind the car and tube but on top of raster 2

Effects, 3D Effects Drop Shadow, same settings

Edit, copy Kitty 1

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 30%

Move to the right side and place in front of the back tire of the car

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Growing Hearts 2

Edit, Paste, Paste as new layer

Move down to raster 2 and over to the right of the frame

Image, resize 50%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Growing Hearts 1

Edit, paste, paste as new layer

Image, resize 50%

Image, Mirror

Move to the right and move to place on the top of the other

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Doodle 2

Edit, Paste, Paste as new layer

Image, resize 50%

Image, Mirror

Move to the left of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Eyeball

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place behind the tube. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Devil Minion

Edit, Paste, paste as new layer

Image, resize 30%

Move to the bottom left of the frame and place at the tire on the left

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy  Heartwire

Edit, Paste, paste as new layer

Move down to raster 2

Image, resize 70%

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Wednesday, January 15, 2014

Be Mine PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.


I am using the artwork of Elias Chatzoudis You need a license to use this tubes. This tube was one that was purchased at PTE. You can buy his tubes at his store HERE

I am using the PTU kit Be Mine by Manipulated by Magik. You can buy this kit exclusively at PFD and Mystical Scraps and Thrifty Scraps




Open new image 600 x 600

Edit, Copy Frame 5

Edit, paste, paste as new layer

Image, resize 80%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Sparkles

Edit, paste, paste as new layer

Edit, Clear

Selections Select None

Layers, Duplicate

Image, Mirror

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Spiral

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 85%

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Image, Flip

Edit, Copy Wire

Edit, paste, paste as new layer

Image, resize 90%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Giftbox

Edit, Paste, Paste as new layer

Image, resize 50%

Layers, arrange, bring to top

Move to the left bottom of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Box of Chocolates

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place in front of the giftbox and to the left some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Cupake

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place to the right of the candy box some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Choco Strawberry

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place next to the cupcake

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Heart Vine

Edit, paste, paste as new layer

Image, rotate, free rotate, right 95

Move to the top of the frame

Image, resize 85%

Effects, 3D Effects Drop Shadow, same settings

Edit, copy Vase

Edit, paste, paste as new layer

Move to the bottom right of the frame

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Love Cup

Edit, Paste, Paste as new layer

Move to the right of the Vase

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bottle

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place in front of the vase

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Be Mine Heart

Edit, Paste, Paste as new layer

Image, resize 60%

Move to the top and place in the left of the heart vine

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Candle

Edit, paste, paste as new layer

Image, resize 50%

Move to left and place behind the candy box and in front of the gift box to the left. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Jewels

Edit, Paste, paste as new layer

Image, resize 80%

Move to the bottom of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, Paste, paste as new layer

Layers, arrange, bring to top

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Monday, January 13, 2014

Freaky Chic FTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.


I am using the artwork of Ismael Rac. You need a license to use these tubes. You can purchase the tube from his store found HERE

I am using the FTU kit Freaky Chic by Gimptastic Scraps . This kit can be found HERE


Open new image 600 x 600

Edit, Copy Frame 5

Edit, paste, paste as new layer

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 6

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, clear

Edit, copy Cityscape

Edit, paste, paste as new layer

Move down to the bottom of the frame some. See my tag for placement

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Doodle

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Purse

Edit, paste, paste as new layer

Image, resize 50%

Layers, arrange, bring to the top

Move to the bottom left of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Brush

Edit, Paste, Paste as new layer

Image, resize 50%

Move to the left and place in front of the purse

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Comb

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place at the bottom of the purse below the brush

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Lipstick

Edit, paste, paste as new layer

Image, resize 70%

Move to the left and place behind the brush but above the comb

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Nailpolish

Edit, paste, paste as new layer

Move to the left and place next to the lipstick. See my tag for placement

Image, resize 70%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Cellphone

Edit, paste, paste as new layer

Move to the left and move down to Raster 2

Image, rotate, free rotate, 15, left

Effects, 3D Effects Drop Shadow, same settings

Edit, copy Credit Card

Edit, paste, paste as new layer

Move to the left and move up to in front of the purse

Image, resize 40%

Image, rotate, free rotate, right, 15

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Flying Skull

Edit, Paste, Paste as new layer

Move to the top of your frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Candle

Edit, paste, paste as new layer

Image, resize 70%

Image, Mirror

Move to the right hand corner of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bottle

Edit, Paste, Paste as new layer

Image, resize 80%

Move to the right and sit in front of the candles

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Hat

Edit, paste, paste as new layer

Image, resize 40%

Layers, arrange, bring to the top

Move to left and place to the left of the tag. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, Paste, paste as new layer

Image, resize 85%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Charm 2

Edit, Paste, paste as new layer

Move to make it look like it is hanging out of the tubes hand

Image, rotate, free rotate, right 15

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Crown

Edit, paste, paste as new layer

Image, resize 60%

Move to the right and place in front of the bottle

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Cat

Edit, paste, paste as new layer

Image, Mirror

Image, resize 60%

Move to the far right of the tag

Effects, 3d Effects, Drop Shadow, Same Settings

Edit, Copy Boot 2

Edit, paste, paste as new layer

Image, resize 70%

Move to the left and move down til it is behind the purse and move to the side of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy cuff

Edit, paste, paste as new layer

Image, resize 40%

Layers, arrange, bring to top

Move to the left and place beside the hat

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Tank Top

Edit, paste, paste as new layer

Image, resize 60%

Move down to Raster 2

Move to the left of the tag

Image, rotate, free rotate, 15, left

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG


Wednesday, January 8, 2014

Pynk PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.


I am using the artwork of Zindy You need a license to use this tube. You can buy her tubes at her store HERE

I am using the PTU kit Pynk Panther by Manipulated by Magik. You can buy this kit exclusively at PFD and Mystical Scraps  


Open new image 600 x 600

Edit, Copy Frame 6

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 3

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy City Scape

Edit, paste, paste as new layer

Image, resize 40%

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Glitter Spill

Edit, paste, paste as new layer

Image, resize 85%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Silhoutte

Edit, paste, paste as new layer

Image, resize 75%

Layers, arrange, bring to the top

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Car

Edit, Paste, Paste as new layer

Image, resize 60%

Move to the left and put at the bottom of the Silhoutte

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Lamp Post

Edit, paste, paste as new layer

Image, resize 75%

Move to the right side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Briefcase

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place to the right of the lamp post some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Suitcase

Edit, paste, paste as new layer

Move to the right and to the right side of the briefcase

Image, resize 50%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Champagne

Edit, paste, paste as new layer

Move to the right and place in front of the suitcase

Image, resize 40%

Effects, 3D Effects Drop Shadow, same settings

Edit, copy Champagne Flute

Edit, paste, paste as new layer

Move to the right and place to the left of the champagne

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, Paste, Paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Kitten

Edit, paste, paste as new layer

Move to place next to the tube. See my tag for placement

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Feather

Edit, Paste, Paste as new layer

Move to the left of the frame

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy Ball of Yarn

Edit, paste, paste as new layer

Image, Mirror

Image, resize 40%

Move to place below the cat. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Money bag

Edit, Paste, paste as new layer

Image, resize 40%

Move to the right and place in front of the briefcase and behind the suit case

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Heart Diamond

Edit, Paste, paste as new layer

Move down to Raster 2

Move to the right and place behind the briefcase. see my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Swirl

Edit, paste, paste as new layer

Move to the top of frame

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Image, Mirror

Edit, copy Parasol

Edit, paste, paste as new layer

Image, resize 60%

Move to place behind the tube and to the left. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Tuesday, January 7, 2014

Rotate This PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.


I am using the artwork of KiwiFirestorm. You need a license to use his tubes. You can purchase his tubes at The PSP Project

I am using the PTU kit Rotate by Gimptastic Scraps . This kit is exclusive to The PSP Project


Open new image 600 x 600

Edit, Copy Frame 1

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Glass

Edit, paste, paste as new layer

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Frame 4

Edit, paste, paste as new layer

Image, resize 85%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy WA

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange, bring to the top

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Skull Scatter

Edit, Paste, Paste as new layer

Image, resize 85%

Edit, copy Cityscape

Edit, paste, paste as new layer

Image, resize 85%

Move to the bottom of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 70%

Move down to the bottom of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Rotate

Edit, paste, paste as new layer

Move below the tube layer. Make it look like she is lounging on the word. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Cage

Edit, paste, paste as new layer

Move down to behind the cityscape

Image, resize 60%

Effects, 3D Effects Drop Shadow, same settings

Edit, copy Exit

Edit, paste, paste as new layer

Move to the left and place on the left side of the cage

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Attitude

Edit, Paste, Paste as new layer

Image, resize 60%

Move to  place at the top left of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Edit, Copy Iron Cross

Edit, paste, paste as new layer

Move to the right and place behind the tube. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Finger

Edit, Paste, Paste as new layer

Move to the right and place on the Iron Cross

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Caution Tape

Edit, paste, paste as new layer

Move down to place on the Gate

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Cat

Edit, Paste, paste as new layer

Image, resize 60%

Layers, arrange, bring to top

Move to place in front of the tube and laying on the T & A in Rotate

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Grunge

Edit, Paste, paste as new layer

Move to the top of the frame

Layers, Arrange, send to bottom

Layers, Duplicate

Image, Flip

Edit, copy Skull 1

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 75%

Move to the top middle of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Sunday, January 5, 2014

Rainbow Dreams PTU Tutorial

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.


I am using the artwork of Pinuptoons. You need a license to use his tubes. You can buy his artwork at CDO

I am using the PTU kit Rainbow Dreams by Freek's Creations. You can buy the kit at Mystical Scraps


Open new image 600 x 600

Edit, Copy Frame 3

Edit, paste, paste as new layer

Image, resize 30%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 7

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 30%

Selections, Invert

Edit, Clear

Edit, copy Bubbles

Edit, paste, paste as new layer

Image, resize 30%

Edit, Clear

Selections Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Splash

Edit, paste, paste as new layer

Image, resize 45%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Balloons

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 20%

Move to the left side of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Kitten

Edit, Paste, Paste as new layer

Image, resize 20%

Move to the left and place in front of the balloon ribbon

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Pinwheel

Edit, paste, paste as new layer

Image, resize 10%

Move to the left and place behind the kitten and in front of the balloons

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Rainbow 2

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place on raster 2 behind the balloons

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Swirl 2

Edit, paste, paste as new layer

Move to the right side of the frame

Image, resize 20%

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Firework

Edit, paste, paste as new layer

Move below the Swirl

Image, resize 20%

Effects, 3D Effects Drop Shadow, same settings

Select Raster 2

Layers, Duplicate

Bring to the top

Use your eraser tool to get rid of the excess frame from around the tube and tag you are making. I got rid of all but at the bottom of the tube so that I could hide the cut off legs

Edit, copy Flower

Edit, paste, paste as new layer

Image, resize 20%

Move to the right and place in front of the swirl

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Sun

Edit, Paste, Paste as new layer

Image, resize 20%

Move to the right and move down til it is above the rainbow

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG