This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Nocturne. You need a license to use this tube. You can buy this tube at PFD

I am using the PTU kit Brewing Up Fun by Manipulated by Magik. You can buy this kit exclusively at PFD, Mystical Scraps and Thrifty Scraps





Open new image 600 x 600

Edit, Copy Frame 4

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Fog

Edit, paste, paste as new layer

Move to the right some

Edit, clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Pumpkin Tree

Edit, paste, paste as new layer

Move to place on the frame

Image, resize 85%

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Cauldron

Edit, paste, paste as new layer

Image, resize 70%

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tree

Edit, paste, paste as new layer

Image, resize 80%

Move to the left side of the frame and place behind the cauldron

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Move to the right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Cat

Edit, paste, paste as new layer

Image, resize 50%

Image, Mirror

Move to the bottom right and place on the dirt in front of the tombstone that the tube is on

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Jack o' Lantern

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place behind the cat to make it look like the cat is holding it

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Bat

Edit, paste, paste as new layer

Image, resize 30%

Move to the top left and place it on the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Frog

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom left and place on the left side of the cauldron

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bat Potion

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place on the right side of the cauldron

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Poison

Edit, paste, paste as new layer

Image, resize 30%

Move down and place behind the frog and to the right of it

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Potion

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place behind the poison

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Spellbook

Edit, Paste, paste as new layer

Image, resize 40%

Move to the left and place on the cauldron on the left side

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Broom

Edit, paste, paste as new layer

Image, rotate, free rotate, right, 30

Move to behind the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Glitter

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Spider Heart

Edit, paste, paste as new layer

Image, resize 50%

Layers, arrange, bring to top

Move down to Raster 2 and place at the top of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Skull

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move to the bottom of the tag and move down til part of it is behind the potion on the left

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Witch Hat

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place on the tombstone on the right side

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Venus

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place on the right side of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Goblet

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place on the spellbook on the left side of it

Effects, 3D Effects, Drop shadow, same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Molly Harrison. You need a license to use this tube. You can buy this tube at CDO

I am using the PTU Kit Happy Fall-o-ween by Gimptastic Scraps . This kit is exclusive to The PSP Project





Open new image 600 x 600

Edit, Copy Frame 2

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Sparkle

Edit, paste, paste as new layer

Move to the right some so that more sparkles show

Edit, clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Web

Edit, paste, paste as new layer

Move to the top right of the frame

Image, resize 60%

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Tree

Edit, paste, paste as new layer

Image, resize 60%

Move to the left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Pumpkin

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place on the left side of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bushel Basket

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Apples

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place on the bushel basket til it looks like the basket is full of apples

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Fence

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and place behind the tree and to the left of it some

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Branch

Edit, paste, paste as new layer

Image, resize 80%

Move to the top of the frame but make sure it is above to web

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Wagon

Edit, paste, paste as new layer

Image, Mirror

Image, resize 50%

Move to the right and place to on the left side of the bushel basket  so that part is on that and on the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Apple Cider

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place on the right side of the bushel basket

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Leaf Scatter

Edit, paste, paste as new layer

Move to the top of the frame

Layers, arrange send to bottom. Make sure you have leaves above the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Witch Pot

Edit, Paste, paste as new layer

Image, resize 40%

Move behind the tube but in front of the fence and move to the right. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Acorn

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 40%

Move to the left and place on the right side of the tree at the bottom where the leaves are

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Hand

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place behind the acorn

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Mushrooms

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place behind the  pumpkin

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Cat

Edit, paste, paste as new layer

Image, resize 40%

Layers, arrange, bring to top

Move to the far right and place in front of the wagon and apple cider

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Blob

Edit, paste, paste as new layer

Image, resize 40%

Move to place between the wagon and tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ghost

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place on the tree near the top

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Balloon 2

Edit, paste, paste as new layer

Image, resize 60%

Move to place above the fence and move up toward the top and to the right

Effects, 3D Effects, Drop shadow, same Settings

Edit, copy Jackolantern

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 40%

Move to the right and place in front of the wago

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bat

Edit, paste, paste as new layer

Image, resize 50%

Move to the top left and place beside the tubes head

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Leaf 1

Edit, paste, paste as new layer

Image, resize 20%

Move to the left and place on a branch of the tree

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Move and place on another branch

Edit, Copy Leaf 2

Edit, paste, paste as new layer

Image, resize 20%

Move to the left and place on a top branch

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of  Keith Garvey.You need a license to use this tube. I bought this tube at MPT when he was there, but you can buy his tubes at his store HERE


I am using the PTU kit Casting Spells by Manipulated by Magik. You can buy this kit exclusively at PFD, Mystical Scraps and Thrifty Scraps



Open new image 600 x 600

Edit, Copy Frame 5

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 3

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Spider Web

Edit, paste, paste as new layer

Edit, clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Cauldron

Edit, paste, paste as new layer

Move to the bottom right of the frame

Image, resize 70%

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Skull Potion

Edit, paste, paste as new layer

Image, resize 40%

Move to the far right and place on the right of the cauldron

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Books

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom right and place in front of the cauldron

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Frog Potion

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom right and place on the left of the books and move down and behind the books some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tree

Edit, paste, paste as new layer

Image, resize 70%

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Cloud

Edit, paste, paste as new layer

Move to the left and place behind the tree but above the frame some. See my tag for placement

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Jack o' Lantern

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move to the bottom left and place on the left side of the tree some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Cat

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom left and place on the right side of the jack o lantern

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Broom

Edit, paste, paste as new layer

Image, Flip

Image, resize 50%

Move to the left and place on the left side of the tree behind the jack o lantern

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bat

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 50%

Move to place at the top of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Shoes

Edit, paste, paste as new layer

Image, resize 40%

Move to the far right and place in front of the books on the right side

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, Paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Scatter

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move up and to the right just a small bit

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Frog 2

Edit, paste, paste as new layer

Image, resize 50%

Layers, arrange, bring to top

Move to place on the books

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Crow

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place on the arm of the tree

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Witch Pot

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and move over to place on the right side of the tree. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Ghost

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Pointy Hat

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place on the left side and behind the shoes. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Skull

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place on the cauldron

Effects, 3D Effects, Drop shadow, same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Joahannah von Frankenstein.  You need a license to use these tubes. You can purchase the tube at The PSP Project

I am using the PTU kit Tree Elf by Gimptastic Scraps . This kit is exclusive to The PSP Project





Open new image 600 x 600

Edit, Copy Frame 3

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Leaves 2

Edit, paste, paste as new layer

Move to the far right of the frame

Layers, arrange, send to bottom . Move over so you can see some of the leaves

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy Tube

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bark

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom of the tube to cover up the cut off tree

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Move to place next to each other

Select Raster 2

Edit, copy Grass

Edit, paste, paste as new layer

Image, resize 60%

Move to the top bottom left and place on the frame and move to the left some

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Fence

Edit, paste, paste as new layer

Image, resize 80%

Move behind the grass and move down to the bottom of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Wheel

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place in front of the fence and grass

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Deer

Edit, paste, paste as new layer

Image, resize 50%

Layers, arrange, bring to top

Move to the far bottom left

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, Copy Tree

Edit, paste, paste as new layer

Image, resize 70%

Move to the far left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Rotting Log

Edit, paste, paste as new layer

Image, resize 70%

Move to the bottom right and place above the fence and grass

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Acorn

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 50%

Move o the bottom right and place it on the very right of the rotting log

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Star Seed

Edit, paste, paste as new layer

Image, resize 50%

Move to the far right and place behind some of the acorn

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Pine Cone

Edit, Paste, paste as new layer

Image, resize 50%

Move to the bottom and place beside the acorn. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Garlic Bulb

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom right and place behind the acorn and seed

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Squirrel

Edit, paste, paste as new layer

Image, resize 40%

Move to far right and place on the post of the fence

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Berry

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Primitive Ax

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place beside and behind the pine cone

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Jar of Teeth

Edit, paste, paste as new layer

Image, resize 50%

Move to the far right and place in front of the seed, acorn and pine cone

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bucket

Edit, paste, paste as new layer

Image, resize 50%

Move to the bottom and place in front of the deer and move down til part of it is behind the deers feet

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Dried Leaf 1

Edit, paste, paste as new layer

Image, resize 50%

Move down to the bottom and place on the left of the bucket and under the deer some

Effects, 3D Effects, Drop shadow, same Settings

Edit, copy Dried Leaf 2

Edit, paste, paste as new layer

Image, resize 50%

Move down to the left and move behind the first leaf

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Scatter

Edit, paste, paste as new layer

Move down to Raster 2

Image, resize 80%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bow

Edit, paste, paste as new layer

Image, resize 50%

layers, arrange, bring to top

Move to the far right and place beside the ax

Effects, 3D Effects, Drop Shadow, Same settings

Edit, copy Arrow

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place on the bow

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Tiffany Toland-Scott You need a license to use this tube. You can buy the tube at CDO

I am using the PTU kit IB Tiffany Toland-Scott 17-2 by Tasha's Playground. You can find this kit at CDO





Open new image 600 x 600

Edit, Copy Frame 01

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 05

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move up to the top some

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy e11

Edit, paste, paste as new layer

Image, resize 80%

Move to the top right of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Tube

Edit, paste, paste as new layer

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e10

Edit, paste, paste as new layer

Image, resize 60%

Move to the left and place behind the tube and to the left

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e01

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom left and place in front of the house and to the left

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e15

Edit, paste, paste as new layer

Image, resize 60%

Move to the far right of the frame behind the tube and below the house. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e08

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place on the gravestones

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy e12

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place beside the house. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e13

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right of the frame and place on the side near the top with the candles above the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e16

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom right and place to the far right on one of the gravestones

Effects, 3D Effects, Drop Shadow, Same Settings

Move down your boo car so part of it is in front of the coffin

Edit, copy e07

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom right and place in front of the gravestones but behind the jar and ashes

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e19

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move down and place on the tube where she has the candles. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e18

Edit, Paste, paste as new layer

Image, resize 30%

Move to the right and make it look like it is hanging from the candle holder in the top right corner of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e14

Edit, paste, paste as new layer

Image, resize 50%

Move to the top left of the frame

Image, resize 50%

Layers, arrange, send to to the bottom

Move to the right just a bit so as not to cover the bat on the left

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Maryline Cazenave You need a license to use this tube. You can buy the tube at CDO

I am using the PTU kit IB Cazenave 37-3 by Tasha's Playground. You can find this kit at CDO





Open new image 600 x 600

Edit, Copy Frame 02

Edit, paste, paste as new layer

Image, resize 80%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 04

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy e14

Edit, paste, paste as new layer

Image, resize 70%

Move the far left of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Tube

Edit, paste, paste as new layer

Move to the bottom of the frame

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy 03

Edit, paste, paste as new layer

Image, resize 60%

Move to the top of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e15

Edit, paste, paste as new layer

Image, resize 30%

Move to the top left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e17

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e16

Edit, paste, paste as new layer

Image, resize 70%

Layers, arrange, move to Raster 2

Move to the left and place behind the house

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Edit, copy e08

Edit, paste, paste as new layer

Image, resize 70%

Move to the bottom far left and place in front of the fence but behind the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e19

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move to the top of the house

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e06

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom right and place in front of the pot but behind the tube and place to the far right

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e02

Edit, paste, paste as new layer

Image, resize 40%

Move down to the left and place in front of the house

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e10

Edit, paste, paste as new layer

Image, resize 50%

Move to the right of the dog and place behind and to the left side of the pot

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e13

Edit, Paste, paste as new layer

Image, resize 40%

Move to the right and place behind the previous element and behind it

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e12

Edit, paste, paste as new layer

Image, resize 40%

Move to the top right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e09

Edit, paste, paste as new layer

Image, resize 40%

Move to the far right and place in front of the fence to the far right

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy e01

Edit, paste, paste as new layer

Image, resize 40%

Move to the top of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Wordart

Edit, paste, paste as new layer

Image, resize 20%

Move to the top and place on the moon

Effects, 3D Effects, Drop Shadow, Same settings

Layers, Duplicate

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Elias Chatzoudis. You need a license to use this tube. I bought this tube at MPT when he was there, but you can buy his tubes at his store HERE


I am using the PTU kit Halloween Night by Manipulated by Magik. You can buy this kit exclusively at PFD, Mystical Scraps and Thrifty Scraps



Open new image 600 x 600

Edit, Copy Frame 6

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 1

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Sparkles

Edit, paste, paste as new layer

Move to the right some so that you will have more sparkles showing

Edit, Clear

Edit, copy Web

Edit, paste, paste as new layer

Move to the left some so that the middle of the web is in the middle of the background

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Masking stamp

Edit, paste, paste as new layer

Image, resize 70%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Tree

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, Mirror

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Grave

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom left and place in front of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Moon

Edit, paste, paste as new layer

Image, resize 50%

Move to the top left of the frame and place at the top of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize 70%

Image, Mirror

Move to place so the cut off legs are near the bottom of the frame. We will be covering them up soon

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ghost

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place on the tree

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Cat on Pumpkin

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom far left and place on the left side of the grave

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Boo Car

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Coffin

Edit, paste, paste as new layer

Image, resize 50%

Move to the bottom to place some on the grave than covering up the cut off legs of the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Move down your boo car so part of it is in front of the coffin

Edit, copy Eye

Edit, paste, paste as new layer

Image, resize 20%

Move down to the left and place between the pumpkin cat and coffin

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Owl

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place on the far left tree limb

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Swirlie Tree

Edit, Paste, paste as new layer

Image, resize 60%

Move to raster 2 and place to the far right and place behind the boo car

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Furry Spider

Edit, paste, paste as new layer

Image, resize 20%

Move to the top right and place on the swirlie tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Dracula

Edit, paste, paste as new layer

Image, resize 40%

Move to place in front of the boo car to the right side of the coffin

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Sign

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place behind the boo car and above the swirlie tree

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Lantern

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place on one of the tree branches to make it look like it is hanging from the tree branch

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Jack o' lantern

Edit, paste, paste as new layer

Move down to below Raster 2

Move to the far right so you can see it behind the tube

Image, resize 30%

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Cris DeLara. You need a license to use this tube. You can buy this tube at The PSP Project


I am using the PTU Kit Firefighter by Gimptastic Scraps . This kit is exclusive to The PSP Project





Open new image 600 x 600

Edit, Copy Frame 5

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 5

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Smoke

Edit, paste, paste as new layer

Move to the bottom of the frame. Pull some past the bottom of the frame

Edit, Clear

Edit, copy Broken Glass

Edit, paste, paste as new layer

Move below the smoke

Edit, Clear

Edit, Copy Fire

Edit, paste, paste and new layer

Move down and to the right on top of the smoke

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Barricade

Edit, paste, paste as new layer

Image, resize 80%

Bring to the bottom of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Hydrant

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom left of the frame placing it below the tube and in front of the barricade

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Fire Truck

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom left and place in front of the hydrant

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ladder

Edit, paste, paste as new layer

Image, resize 70%

Move to the left and move down to Raster 2

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Extinguisher

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and behind the truck but in front and to the left side of the hydrant

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Waterdrops

Edit, paste, paste as new layer

Image, mirror

Image, Flip

Move to the left and place it to look like it is coming out of the hose the tube is holding

Image, resize 40%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Axe

Edit, paste, paste as new layer

Image, mirror

Image, resize 50%

Layers, arrange, bring to top

Move to the bottom right of the frame and place it on the barricade

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Hammer

Edit, paste, paste as new layer

Move to the bottom right and lay on top of the axe so it makes an X

Image, resize 50%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bullhorn

Edit, paste, paste as new layer

Image, resize 50%

Move down to the bottom right and place on the axe and hammer

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Claw Tool

Edit, paste, paste as new layer

Image, resize 50%

Move to place at the bottom of the tube next to the firetruck

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Metal Drum

Edit, Paste, paste as new layer

Image, resize 60%

Move to raster 2 and place behind the barricade and to the right

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Boot

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom and place on the bottom of the frame on top of the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Fire Hose

Edit, paste, paste as new layer

Image, resize 40%

Move down til it is on the metal barrel

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Helmet 1

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move down to place on the boot. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Select Raster 2

Edit, Copy Hero

Edit, paste, paste as new layer

Move to the top of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Flames

Edit, paste, paste as new layer

Layers, Arrange, bring to top

Move to the far left and move about half way up the frame

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Helicopter

Edit, paste, paste as new layer

Image, resize 40%

Image, Mirror

Layers, arrange, bring to top

Move to place in between the R and O some.. see my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Dog

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place at the back of the fire truck

Effects, 3D Effects, Drop shadow, Same Settings

Edit , copy Boot Prints

Edit, Paste, paste as new layer

Layers, arrange, send to bottom

Image, resize 95%

Effects, 3D Effects, Drop Shadow, Same settings

Select Metal Drum

Edit, copy Flammable

Edit, paste, paste as new layer

Move over to the barrel

Image, resize 50%

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Siren

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 30%

Move to the bottom right and put in front of the bullhorn

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Shovel

Edit, paste, paste as new layer

Image, Flip

image, resize 70%

Move down til it is above the ladder and on the left

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Edward Reed You need a license to use this tube. You can buy the tube at CDO

I am using the PTU kit CDO Halloween Collab Kit-2014 by Tasha's Playground. You can find this kit at CDO. You can get this as part of a collab by the scrap makers at CDO when purchasing any TWO kits.

WSL_Mask84-15 Found HERE there is a download on the side of the blog for all her masks. You will find the link there for this mask



Open new image 600 x 600

Edit, Copy Frame 01

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 02

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy e17

Edit, paste, paste as new layer

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy e01

Edit, paste, paste as new layer

Image, resize 60%

Move to the top left of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy e02

Edit, paste, paste as new layer

Image, resize 30%

Move to the top left of the frame and place on top of the spiderweb

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e10

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e09

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place on the tree branch on the right

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e06

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place on the left side of the tree beside the tubes leg

Effects, 3D Effects, Drop Shadow, same Settings

Select Raster 2

Edit, copy e03

Edit, paste, paste as new layer

Image, resize 50%

Move to the left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy e04

Edit, paste, paste as new layer

Move down to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e11

Edit, paste, paste as new layer

Move to the far right and place on the right side of the tree

Image, resize 30%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e08

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place in front of but below the boo juice. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e13

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place beside the boo juice and behind the candy

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, Copy e16

Edit, Paste, paste as new layer

Image, resize 60%

Move to the medium of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e14

Edit, paste, paste as new layer

Image, resize 80%

Move to place above the drips and over to the right to place beside the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e07

Edit, paste, paste as new layer

Image, resize 30%

Move to the left and place behind the ghosts

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Paper 02

Edit, Paste, paste as new layer

Layers, arrange, send to bottom

Layers, Load/save mask, load mask from disk, settings:
WSL_Mask84-15
Source Luminance
Fit To Canvas
Invert Transparency NOT checked
Hide All Mask

Layers, merge, merge group

Image, resize 90%

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Jennifer Janesko You need a license to use this tube. You can buy the tube at CDO

I am using the PTU kit IB Jennifer Janesko 140-1 by Tasha's Playground. You can find this kit at CDO



Open new image 600 x 600

Edit, Copy Frame 01

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 01

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move up to the top some so you can get the darker blue color

Selections, Invert

Edit, Clear

Edit, copy e09

Edit, paste, paste as new layer

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy e07

Edit, paste, paste as new layer

Image, resize 70%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Layers, arrange, bring to top

Effects, 3D Effects, Drop Shadow, Same Settings

Select e03

Image, rotate, rotate counter clockwise 90

Edit, copy e03

Edit, paste, paste as new layer

Image, resize 70%

Move to the bottom of the frame and move to the left

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy e16

Edit, paste, paste as new layer

Image, resize 70%

Move to the right and move down til it is on Raster 2 and over to the right some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e05

Edit, paste, paste as new layer

Image, resize 40%

Move to the top left of the frame making sure it is on Raster 2

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e11

Edit, paste, paste as new layer

Image, resize 70%

Move to place beside the tube so you can cover the cut off side

Image, rotate, free rotate, left, 20

Effects, 3D Effects, Drop Shadow, same Settings

Layers, duplicate

Image, resize 80%

Move down some

Edit, copy e14

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 50%

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e12

Edit, paste, paste as new layer

Image, resize 40%

Move to the left and place on the right side and below the previous element

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e04

Edit, paste, paste as new layer

Move to the top right of the frame

Image, resize 40%

Place so some of it is on the wing of the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e10

Edit, paste, paste as new layer

Image, resize 60%

Move down to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e02

Edit, paste, paste as new layer

Image, resize 50%

Move to the top left and place on the clock

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e13

Edit, Paste, paste as new layer

Image, resize 40%

Move to the bottom left and place in front of both of the bottles

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e17

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom left and place behind the previous element and move up some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e18

Edit, paste, paste as new layer

Image, resize 40%

Move to the bottom of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Keith Garvey. You need a license to use this tube. You can buy this tube at his store HERE

I am using the PTU kit Freak Out by Sweet Cravings Scraps. You can buy the kit at TKO Scraps, Exquisite Scraps, and Scraps & Tubes





Open new image 600 x 600

Edit, Copy Frame 2

Edit, paste, paste as new layer

Image, resize 50%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 7

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Spiderweb

Edit, paste, paste as new layer

Move to the left some

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Tree

Edit, paste, paste as new layer

Image, resize 70%

Move to the left side of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Haunted House

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and put in front of the tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Moon Full

Edit, paste, paste as new layer

Image, resize 40%

Move to Raster 2 and place behind the tree and up some what

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bat

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move to place on the moon

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Buzzard

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Pumpkin 1

Edit, paste, paste as new layer

Image, resize 20%

Move to the right side of the buzzard

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Pumpkin 3

Edit, paste, paste as new layer

Image, resize 20%

Move to the bottom right and place on the left side of the buzzard

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Spider

Edit, paste, paste as new layer

Image, resize 30%

Move to the right and place in front of the pumpkins

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, copy Grass

Edit, paste, paste as new layer

Move to the far right of the frame behind the buzzard

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Scarecrow

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and behind the buzzard some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ghost

Edit, paste, paste as new layer

Image, resize 30%

Move to the left some and place on the house and tree

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Tube

Edit, Paste, paste as new layer

Image, resize 80%

Move down to the bottom of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Frog

Edit, paste, paste as new layer

Image, resize 30%

Layers, arrange, bring to top

Move to place on the tubes legs

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Gina King. You need a license to use this tube.You can buy this tube at CDO


I am using the PTU kit Babe Magnet by Manipulated by Magik. You can buy this kit exclusively at PFD and Mystical Scraps



Open new image 600 x 600

Select Frame 4

Image, rotate, rotate clockwise 90

Edit, Copy Frame 4

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 3

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Sparkles

Edit, paste, paste as new layer

Edit, Clear

Edit, copy Lightening

Edit, paste, paste as new layer

Edit, Clear

Edit, copy cloud

Edit, paste, paste as new layer

Move to the top of the frame

Edit, clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Tube

Edit, paste, paste as new layer

Image, Mirror

Image, resize 85%

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy Cluster

Edit, paste, paste as new layer

Image, resize 85%

Move to the bottom of the tubes cut off legs

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Grave

Edit, paste, paste as new layer

Image, resize 50%

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Moon

Edit, paste, paste as new layer

Image, resize 50%

Move to the top right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Bat

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom left and place on the grave

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Eye See U

Edit, paste, paste as new layer

Image, resize 60%

Move behind the tombstone

Image, rotate, free rotate, left 25

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Sign

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom right of the frame. Placing it on the cluster

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Scatter

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Leaf

Edit, paste, paste as new layer

Move to the left of the frame

Image, resize 85%

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Frankenpumpkin

Edit, paste, paste as new layer

Image, resize 40%

Layers, arrange, Bring to top

Move down to the bottom right and place to the right of the sign

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Frankenpoodle

Edit, paste, paste as new layer

Image, resize 40%

Image, mirror

Move to the bottom left of the frame and place on the right side of the tombstone

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Black Widow

Edit, Paste, paste as new layer

Image, resize 20%

Move to the far left and place on the left side of the tombstone

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Elixir

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom right of the frame and place beside the frankenpumpkin on the left side

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Battle Axe

Edit, paste, paste as new layer

Image, resize 50%

Image, rotate, free rotate, right 50

Move to the left and place on the grave

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy Venus

Edit, paste, paste as new layer

Image, resize 40%

Move to the right and place between the elixir and frankenpumpkin

Layers, arrange, bring to top

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Cat

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place near the tube and elixir

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Bone Pumpkin

Edit, paste, paste as new layer

Image, resize 50%

Move Down to above the cloud layer and move up til you see it behind the tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Skull 1

Edit, paste, paste as new layer

Image, resize 30%

Move to the bottom left and place on the tombstone at the bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ghost

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place behind the tube and tombstone

Effects, 3D Effects, Drop shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Alex Prihodko You need a license to use this tube. You can buy this tube at PFD

I am using the PTU kit Birthstone Series:Sapphire by Tasha's Playground.  Tasha no longer sells kits.

This kit is part of a series between Tasha's Playground and Gimptastic Scraps





Open new image 600 x 600

Edit, Copy Frame 02

Edit, paste, paste as new layer

Image, resize 80%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 03

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy e13

Edit, paste, paste as new layer

Image, resize 70%

Move down and to the left some

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy e25

Edit, paste, paste as new layer

Image, resize 85%

Layers, arrange send to bottom

Bring to the top of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Flip

Image, Mirror

Edit, Copy e05

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 50%

Move to the top right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e10

Edit, paste, paste as new layer

Move to the bottom of the frame

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tag

Move down to sit on the pillows

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e04

Edit, paste, paste as new layer

Image, resize 40%

Move to Raster 2 and move to the left some.. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e02

Edit, paste, paste as new layer

Image, resize 60%

Move to the right and place on the moon

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy e09

Edit, paste, paste as new layer

Image, resize 70%

Image, rotate, free rotate, left 20

Move to the top of the frame behind the moon and above the dangling sapphires

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e03

Edit, paste, paste as new layer

Image, resize 50%

Move to Raster 2 and move to the top left corner

Image, rotate, free rotate, right, 10

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e31

Edit, paste, paste as new layer

Move to the far right of the frame. Placing beside the tube and behind the pillows

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e06

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e16

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange, send to bottom

Move to the top left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

Sapphire FTU Cluster Frame using the PTU Kit Birthstone Series: Sapphire by Tasha's Playground. Tasha no longer sells kits.

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of Enamorte. You need a license to use these tubes. You can buy this tube at CDO

I am using the PTU kit Birthstone Series:Sapphire by Gimptastic Scraps . Amy no longer sells kits.

This kit is part of a series between Tasha's Playground and Gimptastic Scraps





Open new image 600 x 600

Edit, Copy Frame 1

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 4

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Selections, Invert

Edit, Clear

Edit, copy Clouds

Edit, paste, paste as new layer

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy Star Scatter

Edit, paste, paste as new layer

Image, resize 85%

Layers, arrange send to bottom

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Edit, Copy Glitter Dust

Edit, paste, paste as new layer

Image, resize 85%

Move to the far left

Effects, 3D Effects, Drop Shadow, Same Settings

Layers, Duplicate

Image, Mirror

Image, Flip

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit tag

Layers, arrange, bring to top

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Moon

Edit, paste, paste as new layer

Image, resize 60%

Move to Raster 2 and put it on the top right corner of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Orb

Edit, paste, paste as new layer

Image, resize 70%

Move to the far right of the frame and place on the moon

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Sapphire Scatter

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange bring to top

Move over to the left some

Effects, 3D Effects, Drop Shadow, same Settings

Layers, Duplicate

Image, Mirror

Edit, copy Leaves

Edit, paste, paste as new layer

Image, resize 70%

Move to the top left of the frame

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Moon Fairy

Edit, paste, paste as new layer

Image, resize 60%

Move to the top right and put it on the moon and orb

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Corner

Edit, paste, paste as new layer

Move to the top left of the frame. Place on raster 2

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Ring

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange, send to top

Move down to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Gem 1

Edit, paste, paste as new layer

Image, resize 80%

Move to the bottom left of the frame and place on the ring

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Glitter Scatter

Edit, Paste, paste as new layer

Image, resize 60%

Move to the far left and place on the corner

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Bottle

Edit, paste, paste as new layer

Image, resize 60%

Move to the bottom right of the frame and pull beside the frame some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy Key

Edit, paste, paste as new layer

Image, resize 50%

Move to the far right and place on the bottle

Effects, 3D Effects, Drop Shadow, same Settings

Select Raster 2

Edit, copy Star Trail

Edit, paste, paste as new layer

Image, flip

Image, Mirror

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Bracelet

Edit, paste, paste as new layer

Layers, arrange, bring to top

Image, resize 40%

Move to the middle of the frame

Effects, 3D Effects, Drop Shadow, Same settings

Edit, Copy Envelope

Edit, paste, paste as new layer

Image, resize 50%

Move to the right and place between the bottle and key

Effects, 3D Effects, Drop Shadow, Same Settings

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG

This tutorial was written by me. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own. It was written in PSP 9 but should be compatible with any version of PSP.



I am using the artwork of PinupToons You need a license to use this tube. You can buy the tube at CDO

I am using the PTU kit Steampunk Romance-mini by Tasha's Playground. You can find this kit at CDO



Open new image 600 x 600

Edit, Copy Frame 03

Edit, paste, paste as new layer

Image, resize 70%

With your magic wand click inside of the frame

Selections, Modify, Expand by 8

Edit, copy Paper 04

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Move down some til the big gear is showing

Selections, Invert

Edit, Clear

Selections, Select None

Select Raster 2

Effects, 3D Effects, Drop Shadow, Settings of:
Vertical : -3
Horizontal: 3
Opacity: 50
Blur: 10
Color: Black
Shadow on new layer NOT Checked

Edit, Copy e28

Edit, paste, paste as new layer

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, same Settings

Edit, Copy e07

Edit, paste, paste as new layer

Image, resize 85%

Layers, arrange, send to bottom

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e12

Edit, paste, paste as new layer

Image, resize 70%

Layers, arrange, bring to top

Move to the bottom left of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e20

Edit, paste, paste as new layer

Move to the right of the frame

Image, resize 60%

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy Tube

Edit, paste, paste as new layer

Image, resize to fit your tube

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e03

Edit, paste, paste as new layer

Image, resize 80%

Move to place on Raster 2 at the top of the frame

Effects, 3D Effects, Drop Shadow, same Settings

Edit, copy e04

Edit, paste, paste as new layer

Image, resize 60%

Move down to Raster 2 and down to the bottom left of the frame. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e16

Edit, paste, paste as new layer

Image, resize 60%

Move to the right and place behind the tube and to the right some

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e19

Edit, paste, paste as new layer

Move down til it is on top of Raster 3

Image, rotate, free rotate, right, 20

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e22

Edit, paste, paste as new layer

Image, resize 50%

Layers, arrange, bring to top

Move to the far right and place on the gear. See my tag for placement

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, copy e29

Edit, paste, paste as new layer

Image, resize 80%

Layers, arrange, send to bottom

Move to the top right of the frame

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e02

Edit, Paste, paste as new layer

Image, resize 40%

Layers, arrange, bring to top

Move to the far left and place on the globe

Effects, 3D Effects, Drop Shadow, Same Settings

Edit, Copy e08

Edit, paste, paste as new layer

Image, resize 50%

Move to the left and place on top of the globe

Effects, 3D Effects, Drop Shadow, Same Settings

Select Raster 2

Edit, Copy e05

Edit, paste, paste as new layer

Image, resize 85%

Move to the bottom of the frame. Make it look like the tube has it in its hand

Remember to add your copyright info. Make sure it is plain and legible

Add your name to the tag

Save as PNG